Traditional Construction vs. Modern Construction

Today we will explain the pros and cons of Traditional Construction and Modern Construction. The traditional way of construction has been the benchmark for a long time. By its definition, the word traditional means customary, conventional, and established. Whereas modular construction, revolutionizes everything, from scathing time to change of attitudes. Both methods have advantages and disadvantages linked. Both Traditional Construction and Modern Construction works similarly. Planning, designing, approvals, site preparation, and development are all essential. But, from this point onwards, everything changes. In today’s rapid world, many techniques became modernized to increase productivity and lower costs. In the construction world, there’s still someplace for traditional techniques and methods, usually producing higher quality, more exclusive results than those achieved with modern construction processes. Construction companies in Toronto have taken the construction industry to another level using advanced construction techniques.

Traditional Construction

Traditional construction refers to the techniques and methods employed for ages to build houses and other structures. In Canada, builders sometimes refer to conventional construction techniques as “brick-and-mortar.” Some contractors call traditional techniques “stick by stick.” This term refers to the fact that traditional construction techniques, from the initial design to the building process, our hands-on.

Source: Pinterest

Foundations laid, walls constructed, roof addition, and at last, the interior of the building starts. Finally, before giving it to the customer, the snag-list is tackled and drawn up– all those small problems and tasks that need addressing. Only then is the building officially complete.

Materials Required:

A wide variety of materials and equipment used in the traditional construction practices, from concrete floor slabs to brick walls. Concrete blocks are often used in building foundations or for load-bearing walls due to their high level of durability and strength. Similar to concrete blocks, a lightweight aerated block is available. Aerated block can also be utilized for building walls and foundations, but has a higher level of cover.

Pros of Traditional Construction vs. Modern Construction

The advantage of traditional construction methods, particularly in housing construction, but also in industrial buildings, is the level of singularity accomplished. When dealing with an architect, a consumer has the choice and freedom to modify; the architect has the opportunity to be creative. With the utilization of more modern construction methods, most homes are in the same style. In the case of modern homes, the components are fabricated at a factory to use on-site quickly. The use of traditional home renovation in Toronto often results in a stouter home of higher quality.

Cons of Traditional Construction vs. Modern Construction

The cons of using traditional techniques of construction for housing and other building is that the process takes a long time. The construction process is more entangled and can demand hiring highly-skilled builders and designers. It can add significant construction costs; materials and labor are more expensive.

Modern or Prefabricated Construction

Prefabricated Prefinished Volumetric Construction (PPVC), generally known as prefab construction, is liable for such great achievements. It is a construction technique whereby free-standing volumetric modules (complete with finishes for floors, walls, and ceilings) are built and massed. Often, these modern structures are constructed off-site in a factory where structural standards strongly implemented before the components are brought together for assembly and construction onsite. Prefab construction is becoming highly popular across the world. In Singapore, demand for prefab is more rampant than before, alongside Mass Engineered Timber. Prefab structures can vary from towering structures to simple one-family houses.

Source: Pinterest

Precast Flat Panel Systems:

This method of construction implicates the procedure of making floor and wall units off-site. For this, the major requirement is separate factory outlets and facilities. Once the panel units get prepared as per the design requirements and specifications, they are then brought to the worksite and placed. This technique is best suited for repetitive construction project activities. The panels manufactured have the services of doors, windows, and finishes. This method also brings building envelope panels installed with insulation and decorative cladding that is fitted by the factory, which often used as load-bearing components.

We provide A-class renovation services in Toronto. For more details, visit us.

3D Volumetric Construction:

As the name implicates, the 3D volumetric construction involves the manufacture of 3D units in the form of modules off-site. They are brought to the worksite and assembled module by module. Each modular unit manufactured is 3D units and installed. Hence this construction is called modular construction or 3D volumetric construction. The transportation of the modules can be in various forms or methods. It involves the shipping of the simple structure or a complete unit with all the external and internal finishes, services installed within it, that the only part remaining in the assembly.

The factory construction brings different units of the same product, maintaining its quality throughout the process. Hence this method is very suitable for repetitive projects so that rapid assembly of the products is possible.

Flat Slab Construction:

The flat slabs are structural components that are highly functional. The ability to provide minimum depth and faster construction makes it stand out. The system also provides a flexible column grid. Wherever it is necessary to close the partitions to the slab soffit as a reason for fire and acoustic concerns, the flat slabs are a desirable solution. When compared with other forms of construction, flat slabs are faster and more economical. Renovations & remodeling Services in Toronto have evolved since the introduction of flat slab construction.

Source: Pinterest

The completion of construction of flat slabs with an excellent surface finish for the soffit; this enables to utilize the bare soffits. The style of construction is also a means of raising energy efficiency.

Precast Concrete Foundations:

For the rapid construction of the foundation, the precast concrete system also installed. This method is more suitable for accost designs. The elements required for the construction of the foundation are constructed separately in the factory (off-site) and brought to the site and massed. The finished product must have the assured quality as specified by the designer. Concrete piles mainly support the foundation assembled. During assembling, both the systems are interconnected. These foundation systems help in increasing productivity, increase quality, decrease the soil excavation quantity.

It is best suited for extreme and adverse weather conditions. When the construction is dealt with on a highly contaminated ground, this system of development is the best choice.

Twin-Wall Technology:

The twin-wall technology is an amalgam solution of a wall system that associates the qualities of precast concrete and erection speed with the structural stability of in-situ concrete. This kind of wall system guarantees structural integrity and waterproof reliability for the structure.

The twin-wall system consists of two walls slabs that are separated. A cast separates the two slabs in lattice girders. The procedure involves:

  1. The wall units placed on the site.
  2. The twin units braced temporarily.
  3. The wall units later joined through reinforcing.
  4.  Concrete is required to fill the gap between the wall units.

This system of construction is faster than the usual construction methods and economical. The twin-wall system mainly employed incorporation with the construction of precast floors.

Insulating Concrete Formwork:

The process of insulating concrete formwork (ICF) have twin-walled panels that are either polystyrene panels or blocks are employed. The construction is quick to create the formwork as the wall of the buildings. The formwork gets filled with concrete. This concrete is factory produced that have a quality guarantee so that of a ready – mixed concrete. Mostly the mix is ready to mix concrete. Expanded polystyrene blocks provide a higher level of thermal insulation. The concrete basis will provide good robustness and better sound insulation.

Source: Pinterest

Precast Cladding Panels:

The cladding system is the installation of one material over another that finally acts as a skin or a layer. This structure of the layer is designed for aesthetics, but it can help in controlling the infiltration of the weather elements. The cladding provides no kind of waterproof condition. Instead, the cladding is also a control measure against water penetration. It safely helps in directing the water or the wind so that there is control of the runoff. It also helps to prevent seepage into the building structure.

Concrete Walls and Floors:

Concrete walls are usually applied for seat walls, retaining walls, decorative exterior, and interior finishes. The concrete is used as a basic flooring material. As per the latest technologies, the concrete floors can be provided with a good finish to provide attractive and smooth flooring.

When compared with any other material, the concrete floors provide a wide variety of material for applications like acid-stained painted, radiant floors, overlays, and micro toppings. The concrete flooring also called cement flooring. When compared with other flooring kinds, concrete flooring is affordable and easily maintainable. A dust mop can clean the proper sealing of concrete flooring.

Traditional and modern construction both have their own perks. Although we feel that modular construction has the upper hand in large part of the discussion, each project should be catered individually. The technique that is selected should match the ultimate desired outcome and the individual limitations of each project on an individual basis. Construction Services in Toronto has moved towards modern techniques as the demand increases.

Read our blog Custom Millwork & Casework-Let’s Discuss the Differences to unleash the interesting facts.